1. <form id='Z3MVNj'></form>
        <bdo id='Z3MVNj'><sup id='Z3MVNj'><div id='Z3MVNj'><bdo id='Z3MVNj'></bdo></div></sup></bdo>

          • 欢迎光临胜帆建材 English |胜帆涂料        新浪微博 | 联系胜帆| 网站地图
            打造中国GRG/GRC/GRP定制品牌
            Build China GRG / GRC /GRPcustom brand

            核心产品

            联系胜帆

            业务咨询:9万彩票  

            招聘咨询:18022022451  

            传真:9万彩票  

            邮件:397210813@qq.com  

            微信订阅号:

              

            微信二维码

            GRG

            您现在的位置是: >>核心产品 >>GRG

            • GRG简介
            • GRG设计
            • GRG生产工艺
            • GRG安装
            • 胜帆建材GRG介绍
              Shengfan building materials GRG introduction

               

              中文全称:玻璃纤维增强石膏成型品
              英文名:Glass Fiber Reinforced Gypsum

              GRG 是玻璃纤维加强石膏板,它是一种特殊改良纤维石膏装饰材料,造型的随意性使其成为要求个性化建筑师的首选,它独特的材料构成方式足以抵御外部环境造成的破损、变形和开裂。

              GRG is a glass fiber reinforced gypsum board, it is a special modified fiber gypsum decorative materials, the shape of the randomness of the requirements of individual architects to become the first choice, its unique material composition is sufficient to resist the external environment caused by damage, deformation and Cracked.




              GRG 产品是采用超细结晶石膏(改良的ɑ石膏)为基料与专用连续刚性的增强玻璃纤维、专用添加剂(符合国际添加剂要求)混合,在模具上经过特殊工艺层压而成的预铸式新型装饰材料,在综合性能上达到了国际质量标准。

              GRG products are ultra-fine crystalline gypsum (modified ɑ gypsum) as the base material and dedicated continuous rigid reinforced glass fiber, special additives (in line with international additives requirements) mixed in the mold through a special process of laminated pre-cast New decorative materials, in the overall performance reached the international quality standards.



              产品表面光洁平滑呈白色,材质表面光洁、细腻,白度达到 90%以上,并且可以和各种涂料及面饰材料良好地粘结,形成极佳的装饰效果、环保安全不含任何有害元素。此种材料可制成各种平面板、各种功能型产品及各种艺术造型,是目前国际上建筑材料装饰界最流行的更新换代产品。

              The surface of the product is smooth and smooth, the surface is smooth and delicate, and the whiteness is over 90%, and it can be well bonded with various kinds of paint and noodle material to form an excellent decorative effect. The environmental protection does not contain any harmful elements.​This material can be made into a variety of flat panels, a variety of functional products and a variety of artistic modeling, is currently the world's most popular building materials decoration industry replacement products.



              正常情况下,建筑设计师们经常会推荐应用在工商业建筑为抵抗高的冲击而增加其稳定性的吊顶为主。此外,由于 GRG 材料的防水性能和良好的声学性能,尤其适用于频繁的清洁洗涤和声音传输的地方,像学校、医院、商场、剧院等场所。

              Under normal circumstances, architects are often recommended to use in industrial and commercial buildings to resist the impact of high impact and increase its stability of the main ceiling.In addition, due to GRG material waterproof performance and good acoustic performance, especially for frequent cleaning and sound transmission of the place,Like schools, hospitals, shopping malls, theaters and other places.



               

              GRG样板
              GRG样板图
              GRG template map

              ------ 责任编辑:胜帆建材
              ------Editor: Sheng Fan building materials

              版权所有http://www.0817df.com(胜帆建材)转载请注明出处
              All rights reserved http://www.0817df.com (Sheng Fan building materials) reproduced please indicate the source

            • GRG深化设计步骤
              GRG deepen the design steps
               

              GRG深化设计的步骤:
              1.熟悉建筑施工图(了解技术参数及要求)
              2.在图纸上把GRG产品部分标出
              3.对GRC进行分类/分区
              4.对各局部的GRC产品进行受力分析,从而决定产品的安装方式
              5.绘制GRC产品安装示意图---CSD
              6.将图纸会审,提出修改意见
              7.提交正式的CSD图纸-----(用来表示产品安装方式)
              8.确认通过后画PSD(生产图纸---用于车间单件产品的示意图)
              9.设计总监审核签字
              10.图纸分发---文控部(进行盖章)

              GRG Deepen the design steps:
              1. familiar with the construction drawings (to understand the technical parameters and requirements)
              2. Mark the GRG product section on the drawing
              3. Classification / partitioning GRC
              4. The local GRC products for force analysis, which determines the product installation
              5. Draw GRC product installation diagram --- CSD
              6. The drawings will be reviewed and made amendments
              7. Submit a formal CSD drawing ----- (used to indicate the product installation method)
              8. Confirm that after drawing PSD (production drawings --- for the workshop single product schematic)
              9. Design Director Review Signature
              10. Drawing distribution --- text control department (for sealing)

              ------ 责任编辑:胜帆建材
              ------Editor: Sheng Fan building materials

              版权所有http://www.0817df.com(胜帆建材)转载请注明出处
              All rights reserved http://www.0817df.com (Sheng Fan building materials) reproduced please indicate the source

               

            • 胜帆GRG生产工艺
              Shengfan GRG production process
               

              GRG生产工艺流程主要有以下六大步:
              1.计算机编程
              2.雕刻机雕刻模具
              3.模具的组装制作
              4.产品的喷射制作
              5.产品脱模保养
              6.产品包装运输

              GRG production process mainly has the following six steps :
              1. computer programmin
              2.Engraving machine engraving mold
              3. Mold assembly production
              4. Production of the product
              5. Product stripping maintenance
              6. Product packaging transport


              一、计算机编程:
                      工厂的雕刻师傅根据CAD图纸,按照客户的要求和图纸上面标注的尺寸,进行编写计算机程序。需要雕刻的一般都是有造型的部位,不能使用平板来实现的部位。

              一、Computer Programming :
                     Factory carving master according to CAD drawings, in accordance with the requirements of customers and drawings marked above the size of the preparation of computer programs.Need to carve the general are the shape of the site, can not use the plate to achieve the site.




              二、雕刻机雕刻模具:
                      雕刻师把编写好的程序输入计算机,三维数控雕刻机就开始自动雕刻模具。一般雕刻的材料主要有木材、石膏、泡沫。

              二、Engraving machine engraving mold :
                      he engraver to write a good program into the computer, three-dimensional CNC engraving machine began to automatically engrave the mold.General carving materials are mainly wood, gypsum, foam.



              三、模具组装制作
                       模具制作的基本流程如下:
                      1.放线---
                      2.开料---
                      3.订底台---
                      4.补灰打模、喷漆---
                      5.装订---
                      6.交QC检货。

              三、Mold assembly production
                      The basic process of mold making is as follows :

                      1.Line
                      2.Open material
                      3.Set the table
                      4.Fill ash mold, paint
                      5.Binding
                      6.To QC 


              四、模具的种类:
              1.木模---使用次数多,可直接做木负模(使用20-50次)
              2. 硅胶模---造价贵,主要用于雕花,不易脱模(使用20-30次)
              3.玻璃钢模---使用次数多,造价比木模贵(使用100-200次)
              4.石膏模---使用次数少(使用2-3次)
              5.水泥模

              四、The type of mold:
              1. Wood mold --- the number of use, can be directly made of wood negative mold (using 20-50 times)
              2. Silicone mold --- cost expensive, mainly used for carving, easy stripping (using 20-30 times)
              3. FRP --- the use of more than the cost of wood than your (use 100-200 times)
              4. Gypsum mold --- use less (use 2-3 times)
              5. Cement mold


              五、产品喷射制作:
                     GRG的制作工艺主要有两种,一种是手糊工艺,另外一种是喷射工艺。我司制作的所有的产品,全部是喷射工艺制作。喷射工艺是GRG行业标准指定的制作工艺。喷射工艺制作出来的产品的质量和强度都是手糊工艺的几倍甚至几十倍以上。
               喷射工艺的主要步骤如下:
                1.清理模具---
                2.打脱模油---
                3.开料---
                4.喷制---
                5.背部收光---

              五、Product jet production :
                     GRG production process there are two, one is hand paste process, the other is the spray process.I produced all the products, all of the spray process production.The spray process is the GRG industry standard designation process.The quality and strength of the products produced by the spray process are several times or even several times more than the hand-paste process.
              The main steps of the spray process are as follows :
                1.Cleaning mold---
                2.Playing off the oil---
                3.Open material---
                4.Sprayed---
                5.Back light---


              六、产品脱模保养:GRG的产品脱模以后保养三天就可以
                     产品包装运输:出厂的所有的产品,都需要进行良好的包装。首先用包装纸来包装,外部还需要用木卡来进行加固。运输方式一般有陆运和海运两种。如果条件和工期允许,首选海上运输。条件不允许的选择陆运。
              六、Product stripping maintenance : GRG products can be lifted for three days after stripping
                      Product packaging Transport : All the products of the factory need to be well packed.First with wrapping paper to packaging, the external also need to use wood to reinforce.There are two kinds of land transport and sea transport.If conditions and duration allow, preferred sea transport. Conditions are not allowed to choose land transport.

               

              GRG生产工艺流程
              GRG生产工艺流程图

              ------ 责任编辑:胜帆建材
              ------Editor: Sheng Fan building materials

              版权所有http://www.0817df.com(胜帆建材)转载请注明出处
              All rights reserved http://www.0817df.com (Sheng Fan building materials) reproduced please indicate the source

            • 胜帆GRG安装工艺
              Shengfan GRG installation process

               

              一、GRG吊顶安装
              吊顶安装主要通过螺杆连接,螺杆不小于8厘米 ,但螺杆连接不宜过高,如果吊顶完成面与楼板高度超过1米,最后另行焊接转换层转,换层的高度如果超过2米,就必须做双层钢架,钢架转换层必须考虑空间跨度,跨度过大的转换层应加大钢材型号以降低下垂指标。转换层做好后最好放置几天时间,让钢材的自然下垂到位后再进行GRG安装。安装吊顶GRG时可根据经验值把吊顶中部的水平适当调到5mm左右,GRG板块安装好后由于受力作用钢架还会再次下降,但系数不大,所以通过提高中部水平来解决。由于GRG的特性易变型,并且弹性比较好,所以安装好后的GRG板块之间须用螺丝连接。

              一、GRG ceiling installation
              Ceiling installation mainly through the screw connection, the screw is not less than 8 cm, but the screw connection should not be too high, if the ceiling finish and floor height of more than 1 meter, and finally another welding conversion layer, the height of the layer if more than 2 meters, Double steel frame, steel frame conversion layer must take into account the space span, the span of the conversion layer should be increased to increase the steel model to reduce the sag index.After the conversion layer is best to put a few days after the time, so that the natural sagging steel in place after the GRG installation.When installing the ceiling GRG, the level of the middle part of the ceiling can be adjusted to about 5mm according to the experience value. After the GRG plate is installed, the steel frame will fall again after the steel plate, but the coefficient is not big, so it is solved by raising the middle level.As the GRG characteristics of the variable type, and the elasticity is better, so the installed GRG plate must be connected with a screw.



               

                板块与板块的连接图

              板块与板块的连接图
              Plate and plate connection diagram



              GRG吊顶安装示意图

               GRG吊顶安装示意图
              GRG ceiling installation diagram



               

              二、墙面安装(与GRC干挂法安装一样)
              二、Wall mounting (same as GRC dry installation)



              三、接缝处理:
                     1.嵌缝膏调配:拉法嵌缝石膏+短纤(玻璃纤维)+缓凝剂+水
                     2.步骤:安装缝用嵌缝膏填实(可分两次填实),然后用玻纤网将接缝处贴好(玻纤网必须用水泡足方可使用),贴完玻纤网后表面用防水腻子批平后方可进入下一表面处理工序。
              三、Seam processing :
                     1. Cracked paste deployment: Rafa caulking plaster + staple fiber (glass fiber) + retarder + water
                     2. Step: install the seam with caulking paste filled (can be divided into two fill), and then use the fiberglass mesh will be posted at the seam (fiberglass mesh must be used only before the bubble), paste the finished glass After the surface with a waterproof putty approved before entering the next surface treatment process.




              四、GRG表面处理:
                    1.乳胶漆
                    2.氟碳漆
                    3.金箔,银箔,铜箔
                4.胶衣
              四、GRG Surface Treatment:
                     1.Latex paint
                     2. Fluorocarbon paint
                     3. Gold foil, silver foil, copper foil
                     4. gel coat




              五、钢材计算公式(换算比重)
                    1.无缝钢管:(外径—壁厚)*壁厚*0.02456
                  2.方钢:周长*壁厚*0.00785
                  3.等边角铁:(边宽*2—边厚)*边厚*0.00795
                  4.不等边角铁:(长边宽+短边宽—边厚)*边厚*0.00795
                    5.槽钢 工字钢:0.00785*腿厚【高+e(腿宽—腰厚)】
                    6.钢板:7.85*厚度
              五、Calculation formula for steel (conversion ratio)
                     1. Seamless steel pipe: (OD - wall thickness) * Wall thickness * 0.02456
                     2. Square steel: Perimeter * Wall thickness * 0.00785
                     3. equilateral angle: (width * 2 side thick) * side thick * 0.00795
                     4. Unequal angle iron: (long side width + short side width - side thick) * side thick * 0.00795
                     5. Channel I-beam: 0.00785 * Leg thickness [high + e (leg width - waist thickness]
                     6. Steel plate: 7.85 * Thickness


               

              ------ 责任编辑:胜帆建材
              ------Editor: Sheng Fan building materials

              版权所有http://www.0817df.com(胜帆建材)转载请注明出处
              All rights reserved http://www.0817df.com (Sheng Fan building materials) reproduced please indicate the source